Personalities and alimentary behaviors in obese patients

The ability of lonidamine (LND), an energolytic derivative of indazole-carboxylic acid, to modulate the cytotoxic activity of cisplatin (CDDP) and epidoxorubicin (EPI), singly or in combination, was investigated in two human breast cancer cell lines (MCF7 and T47D). A 72-hr post-incubation with a non-cytotoxic concentration of LND (75 microM) increased the activity of a 1-hr CDDP treatment as well as that of a 1 to 16-hr EPI treatment. A different pattern of interaction among the drugs and modulator was observed as a function of the sequence of drug treatment. Specifically, supra-additive or additive effects of the combination were obtained in the two cell lines according to the different treatment schemes. In particular, the maximum potentiation was observed in MCF7 cells simultaneously exposed to CDDP, EPI and LND for 1 hr and then post-incubated with LND for 72 hr, and in T47 first exposed to EPI and LND, then to CDDP and LND, and finally post-incubated with LND. Flow cytometric analysis of MCF7 cell distribution in the different cycle phases showed that combined treatment with EPI/CDDP/LND was able to stabilize cell cycle perturbations (mainly G2M accumulation) induced by individual agents. The ability of LND to potentiate CDDP and EPI cytotoxicity, and the consideration that LND causes side effects different from those caused by alkylating agents and anthracyclines, make this compound an attractive candidate for multidrug combination therapy in breast cancer.     

Improvement in phenolic composites for special construction needs

The use of fibre reinforced composites in the construction industry is well established. However, if the proper technology is capable of handling all situations from a mechanical/architectural point of view, it is recognised that the fire hazard required a critical survey to be made of the use of polymer materials. The selection is quickly made today and only retains special engineering thermoplastics and phenolic thermosets. The latter, obviously much cheaper, suffered long from bad opinions due to their brittleness and ugly appearance. Different achievements support the opinion that some phenoli-based glass fibre reinforced plastics lend themselves both, technically and economically, to sound applications in the construction industry.     

Influence of High-Pressure Coolant Assistance on the Machinability of the Titanium Alloy Ti555–3

The origin of this article is the quantification of productivity gains and the improvement in surface integrity seen for a recent titanium alloy that is seeing increasing use in the aeronautical industry. The Ti555–3 titanium alloy, which is starting to find greater application in the aeronautical field, exhibits certain difficulties in terms of machining. High Pressure Coolant (HPC) assisted turning consists of projecting a high pressure coolant jet between the chip and the tool. Comparisons are made between assisted turning using variable jet pressure and conventional turning (dry and classical lubrication). It is shown that it is possible to improve productivity by using HPC-assisted machining. The results highlight good chip fragmentation and a great improvement of tool life with HPC assistance. Surface integrity is also shown to be improved, through surface roughness parameters that decrease, and surface residual stresses that become more compressive. These effects have been attributed to the thermo-mechanical action of the coolant jet resulting in lower cutting forces, lower coefficient of friction and lower temperature in the cutting zone.     

Character motion synthesis by principal component analysis and motion control interface by hands

In this paper, we propose an interactive character motion control interface that uses hands. Using their hands and fingers, the user can control a large number of degrees of freedom at the same time. We applied principal component analysis to a set of sample poses and assigned the extracted principal components to each degree of freedom of the hands (such as the hand positions and finger bending/extending angles). The user can control the blending weights of the principal components and deform the character's pose by moving their hands and bending/extending their fingers. We introduced pose and action controls, so that we can alter the standing pose and perform various actions with deformations. So that various types of actions were possible, we constructed a number of action models in advance. We introduced action model selection and action execution mechanisms. We developed methods for computing the feature vector, for applying principal component analysis, and for pose and action synthesis. In addition, we introduced a pose transition method for performing a step motion when necessary to prevent foot sliding. We present our experimental results and demonstrate the effectiveness of our interface. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

Disorders and oxygen vacancies in p-type Sn2B2O7 (B = Nb,Ta): Role of the B-site element

Sn₂Nb_2−xTa_xO₇ (x = 0.0–2.0) with pyrochlore structure is a promising material for p-type oxide semiconductors. A systematic study of its Nb/Ta ratio indicated that the hole–generation efficiency of the Nb end (Sn₂Nb₂O₇) was an order of magnitude lower than that of the Ta end (Sn₂Ta₂O₇). Although this occurs due to differences in oxygen-vacancy formation, the origins of the hole–generation efficiencies remain unclear due to limited information on local and global crystal-structure disorders in pyrochlore Sn₂Nb₂O₇ and Sn₂Ta₂O₇. In this study, the crystal structures of Sn₂B₂O₇ (B = Nb, Ta), composed of BO₆ octahedra and Sn₄O tetrahedra, were investigated using X-ray absorption spectroscopy and X-ray diffraction. A detailed investigation of the local and global crystal structures indicated a larger amount of disorder in the Sn₄O tetrahedra in Sn₂Nb₂O₇ compared to Sn₂Ta₂O₇; disorder in the BO₆ octahedra occurred only in Sn₂Ta₂O₇. This study indicates that an appropriate selection of the B-site element is vital for suppressing defect and disorder formation in Sn₄O tetrahedra and subsequently improving the hole–carrier–generation efficiency.     

Improvement of the surface quality of foam injection molded products from a material property perspective

Microcellular injection molding is an attractive method. However, their surface imperfections have been a major problem hindering wide industrial applications. Several methods have been proposed to improve the surface appearance of foams. In this study, we proposed a method to improve the surface appearance of polypropylene (PP) foams from the material property perspective, especially with regard to crystallization and viscosity. The basic idea of the surface improvement is to reduce the size of bubbles generated at the flow front, delay the solidification behavior of the polymer at the mold interface, squeeze the bubbles existing at the mold–polymer interface, and redissolve the bubbles into the polymer by holding pressure. Blending a low-modulus PP delays the crystallization of the polymers at the skin layer and solidification, taking enough time to squeeze the bubbles smaller. A sorbitol-based gelling agent, bis-O-([4 methylphenyl]methylene)-D-Glucitol, was used to increase the viscosity at a low strain rate to reduce the size of the bubbles generated at the flow front during the filling stage. The foam injection molding experiments demonstrated that the proposed method effectively improved the surface appearance of the foams. In particular, the surface appearance of the foams became almost equivalent to that of solid samples using low-modulus PP.     

Sources and variations of mercury in tuna

While the bulk of human exposure to mercury is through the consumption of marine fish, most of what we know about mercury methylation and bioaccumulation is from studies of freshwaters. We know little of where and how mercury is methylated in the open oceans, and there is currently a debate whether methylmercury concentrations in marine fish have increased along with global anthropogenic mercury emissions. Measurements of mercury concentrations in Yellowfin tuna caught off Hawaii in 1998 show no increase compared to measurements of the same species caught in the same area in 1971. On the basis of the known increase in the global emissions of mercury over the past century and of a simple model of mercury biogeochemistry in the Equatorial and Subtropical Pacific ocean, we calculate that the methylmercury concentration in these surface waters should have increased between 9 and 26% over this 27 years span if methylation occurred in the mixed layer or in the thermocline. Such an increase is statistically inconsistent with the constant mercury concentrations measured in tuna. We conclude tentatively that mercury methylation in the oceans occurs in deep waters or in sediments.